-
February 13th, 2002, 03:35 AM
#1
Inactive Member
yes, it shall be done....i have the ciznash to do it. it'll be mated to a GSR tranny. what is going to be the problem come wiring time? cuz they're OBD2, aren't they? oh, and BTW, since my tranny is VSS equipped, does this mean i can't use my stock cluster? i confused myself really bad today thinking about that..lol.
------------------
-
February 13th, 2002, 05:30 PM
#2
Inactive Member
that's what i was thinking. good deal. know anything about the wiring?
------------------
-
February 13th, 2002, 05:55 PM
#3
Inactive Member
Your gonna run an OBD1 ECU - P30 or rechipped D16Z6 with a Mugen or some kind of program to work that engine best with advice from a known shop.
The Tranny is gonna nail your frame mount on the passenger-side. Just a forewarning.
The Hood is also gonna be too short.
Also, since your converting over to OBD1, your gonna need to pay around $500 for a premade wiring harness - ECU and engine, or have a shop do the install. Just a heads up. If money is time, and time is money, then I'd wait and have it done right.
Look into the B18C Place Racing Mount Kit and a larger Radiator.
------------------
-
February 13th, 2002, 07:10 PM
#4
Inactive Member
i've already ordered an aluminum racing radiator, i'm getting a SiR hood for clearance (SiR for USDM lights..same clearance as true SiR)....i'm certainly not going to shim the engine down..i've already read the no-no's in that. i'm definitely having a shop do the install...Jotech Motorsports (kenny tran)..i was just wondering how hard it's going to be for them to get that done. btw, jon, what exactly do you mean by the tranny is going to nail the frame mount? i was trying to find the email you wrote me about the b18c swap, but i think i deleted it accidently. i certainly want to get all of this done right...or at least as right as it can be. oh, one more thing. i can either get a JDM or USDM engine....jdm has 11.1 or so c/r. would it be pointless for me to get it? it's only 5 hp more, and i'm a little scared that i'll be hurting the engine since all i can get is 93 octane. or should i get JDM? thanks for the info.
------------------
[This message has been edited by gotatight92si (edited February 13, 2002).]
-
February 13th, 2002, 07:53 PM
#5
Inactive Member
hey where did u get the sir hood for the usdm civic, i want one too!!!
------------------
-
February 14th, 2002, 04:53 AM
#6
Inactive Member
dude, you can always swap out the VSS sensor that is electronic out of the new tranny with the cable actuated one in your old tranny. at least that is true with the Y1 tranny in my b16. or you can do what i did..get a jdm gauge cluster and rewire. heck, you might want to do that anyways to have the higher revving tach. they go for like 200 bucks on the jdmhonda site.
------------------
-Ben L.
1989 Civic Si w/ B16
1990 300ZX TT Stage III
[This message has been edited by Ben L (edited February 13, 2002).]
-
February 14th, 2002, 06:11 AM
#7
Inactive Member
i've already determined that it's going to be USDM :P and i *think* i might actually go with a Y1 LSD...hmmmm....btw, the hood that fits USDM fronts but SiR style is fiber, and from www.fiberimages.com
------------------
-
February 14th, 2002, 02:57 PM
#8
Inactive Member
...this has been moved to the hybrid forum as well...
------------------
www.marked001.com
under construction
[email protected]
illadelphia, PA
-
February 14th, 2002, 04:56 PM
#9
Inactive Member
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
but if you dont have an emissions test, i wouldnt know which one to get...ill leave that to the people who know
Bookmarks